Recommended fabrics:
Apply to any cotton or cotton/polyester blend material.
NOT FOR USE ON NYLON.
Heat Press Settings:
Temperature 300° - 320°
Pressure: 55-70 LBS
Medium-Firm Pressure
6-8 on Auto Clam Hotronix
Preheat Platen: Prior to beginning, press empty pad for 3 cycled of 15 seconds.
Failure to preheat the pad will cause insufficient heat and will damage the first 3 transfers.
Step 1. Cut
Use a plotter, die-cut, or laser cut. Mirror the image so the lettering says readable.
Step 2. Weed
Remove unwanted areas around the design.
Step 3. Press
Cover with Teflon sheet and press at ~310°F for 10-15 seconds with Medium-Firm pressure.
Step 4. Peel while still warm
Multi-Color Applications Glitter Heat Transfer Vinyl
After preheating the garment, position the first color, place the cover sheet over the graphic, and press for 3-5 seconds at 320°F (160°C). Peel warm. Align the second color and replace the cover sheet. Repeat for additional colors. Finish with the final application step. Easy to position and reposition on the substrate, but Thermo-Tape will help to hold it in place on tough-to-do items.
Washing Instructions Glitter Heat Transfer Vinyl
Machine wash, cold. Turn garment inside out.
Do not Bleach
Line Dry
Do not iron
